|
| |
|
EPOXY diëlectrische gietharsen voor toepassing ingieten
van elektronica en elektrische componenten
DIELECTRICS /
EPOXY
| flexible |
| References |
Special properties |
Shore Hardness |
Viscosity ( mPa.s) |
Density |
Mix Ratio by weight |
Typical Applications |
|
RE 22801 / RE 2120
|
Electrical insulating epoxy resin. bi-component,
semi flexible, good thermal ageing stability. |
D 62 |
3500 |
1.47 |
100 / 20 |
Casting resin for mechanical & numerous
electrical applications, especially for low or
medium voltage (capacitors, tranformers, filters). |
| semi-rigid |
| References |
Special properties |
Shore Hardness |
Viscosity ( mPa.s) |
Density |
Mix Ratio by weight |
Typical Applications |
|
RE 22801 / RE 2050
|
Semi-rigid epoxy resin. Good thermal ageing
stability, bi-component. |
D 80 |
4200 |
1.53 |
100 / 11 |
Numerous electrical applications, especially for
low or medium voltage. |
| rigid |
| References |
Special properties |
Shore Hardness |
Viscosity ( mPa.s) |
Density |
Mix Ratio by weight |
Typical Applications |
|
RE 22891 / RE 22891
|
Flame retardant properties. Long cure rate.
Chemical resistance. High temperature resistance. A
slightly rigid version of RE 22801. |
D 88 |
3000 |
1.49 |
100 / 12 |
Multipurpose: electric motors, transformers,
coils, relays. |
| very rigid |
| References |
Special properties |
Shore Hardness |
Viscosity ( mPa.s) |
Density |
Mix Ratio by weight |
Typical Applications |
|
RE 22904 / RE 22904
|
Electrical insulating epoxy resin. Long pot life
at room temperature , good behaviour at thermal
shocks & low CTE. |
D 92 |
3500 |
1.56 |
100 / 13 |
Casting resin for mechanical and numerous
electrical applications especially for low or medium
voltage. |
| heat cure |
| References |
Special properties |
Shore Hardness |
Viscosity ( mPa.s) |
Density |
Mix Ratio by weight |
Typical Applications |
|
RE 22850 / RE 31100
|
Low viscosity. Refillable with silica. Good
thermal shock resistance. High temperature
resistance (150°C). Excellent for demanding
applications. Two component room temperature cure,
low viscosity system offering an economical potting
material with excellent handling properties. Absorbs
the stress of conflicting CTE’s among components. |
D 86 |
2100 |
1.19 |
100 / 80 |
Transport & distribution of energy. High voltage
coil systems & parts needing thermal resistance. |
|
RE 42915 - 92
|
Heat & chemical resistance. Excellent
dimensional stability. Equivalent to RE 22904 in
single system formulation. |
D 91 |
2800 (60 °C) |
1.6 |
1 part |
Automotive encapsulation under the hood. |
|
Polyurethaan diëlectrische gietharsen voor
toepassing ingieten van elektronica en
elektrische componenten
DIELECTRICS | POLYURETHANE
| flexible |
| References |
Special
properties |
Shore
Hardness |
Viscosity (
mPa.s) |
Density |
Mix Ratio by
weight |
Typical
Applications |
|
RE 11550 / RE 1020
|
Fast processing due to
rapid-cure speed. Low
viscosity. Fills intricate
parts void-free. Low stress
on embedded components.
Allows flexible processing:
injection moulding or
machining. Excellent
electrical properties over a
wide range of environmental
conditions. |
A 55 |
500 |
1.14 |
100 / 30 |
Cable connectors.
Protection of connectors.
Ideal for the automotive
industry. Fullfills
autospecification norms. |
|
RE 11501 / RE 1020
|
Low stress on embedded
components. U.L. Certified.
The exceptional combination
of a soft PU makes this
resin formulation ideal for
avoiding mechanical stress
on components. Choice of
three different potlife (handling
time). |
A 55 |
2400 |
1.29 |
100 / 10 |
Sensitive electronic
components: sensors for all
transport applications |
|
RE 11613 / RE 1040
|
Excellent dielectric
properties. Fungus
resistance. Low stress on
embedded components.
Excellent moisture
resistance. A high quality,
high-end product. |
A 60 |
2500 |
0.97 |
100 / 26 |
All underwater
applications such as pomps.
All applications for
electronic components used
in wet environmentsfor
example, all applications
where high moisture
resistance is required. |
|
RE 11820 / RE 1020
|
Excellent dielectric
properties. Fungus
resistance. Excellent
moisture resistance. A high
quality, high-end product.
Choice of three different
potlife (handling time). |
A 82 |
4500 |
1.10 |
100 / 25 |
Transmitter, all
underwater applications such
as pomps. All applications
for electronic components
used in wet environmentsfor
example, all applications
where high moisture
resistance is required. |
| semi-rigid |
| References |
Special
properties |
Shore
Hardness |
Viscosity (
mPa.s) |
Density |
Mix Ratio by
weight |
Typical
Applications |
|
RE 12461 / RE 1010
|
U.L. Certified. Low
viscosity. Good electrical
heat dissipation & thermal
conductivity. Available in
several colors. Good
humidity resistance. |
D 46 |
1100 |
1.55 |
100 / 16 |
General purpose . Ideal
for intricate parts. |
|
RE 12551 / RE 1020
|
U.L. Certified. Good
electrical heat dissipation
& thermal conductivity.
Excellent mechanical,
thermal and chemical
resistance properties (130
°C). Choice of two different
potlife (handling time). |
D 55 |
2400 |
1.55 |
100 / 14 |
Small transformers.
Electronic cards. Relays.
Electronic filters.
Applications requiring
reasonable resistance to
humidity. |
|
RE 12560 / RE 1020
|
General purpose resin.
Ease of Processing. Low
viscosity. Can be used in
processing where manual
application is a required.
Choice of three different
potlife (handling time). |
D 56 |
1400 |
1.33 |
100 / 25 |
Small transformers.
Electronic cards. Relays.
Electronic filters.
Applications requiring
reasonable resistance to
humidity. |
|
RE 12500 / RE 1030
|
General purpose resin.
Good electrical heat
dissipation & thermal
conductivity. Economical
system. |
D 50 |
2600 |
1.66 |
100 / 10 |
Applications which do
not require highly technical
specifications. |
|
RE 12602 / RE 12602
|
Short time-cure speed
and medium viscosity allows
for thorough wetting. A
convenient 1:1 by volume mix
ratio. Fast setting. Doesn't
run. Ideal for moisture
proofing. Adheres well to
most plastics and metals. |
D 60 |
THIXO. |
1.30 |
127 / 100 |
Sensitive potting
applications where leakages
must be avoided, for example
cable connections. |
| rigid |
| References |
Special
properties |
Shore
Hardness |
Viscosity (
mPa.s) |
Density |
Mix Ratio by
weight |
Typical
Applications |
|
RE 12851 / RE 1030
|
Flame Retardant
Properties. Electric heat
dissipation & thermal
conductivity. Economical
system. |
D 85 |
3800 |
1.63 |
100 / 20 |
General purpose for all
kind of transformers and
capacitors. |
|
RE 11880 / RE 1020
|
High temperature
resistance. Low moisture
absorption. Low viscosity.
Excellent mechanical.
Thermal and chemical
resistance properties. |
A 88 |
1500 |
1.41 |
100 / 20 |
Ideal for automotive
applications requiring heat
resistance. Sesnors.
Electronic devices. |
|
RE 12885 / RE 1030
|
Chemical resistance.
Extreme temperature
performance. Excellent
dielectric properties. Low
viscosity. Good thermal
mechanical shock resistance.
Rapid cure at elevated
temperatures. Excellent for
demanding industrial
applications. |
D 88 |
2000 |
1.53 |
100 / 40 |
Highly technical
transformers operating in
severe industrial
environments (grease,
moisture, etc.) |
|
RE 12771 / RE 1010
|
Low viscosity. Flame
retardant properties. Rapid
reactivity. Fast curing for
faster processing. |
D 77 |
1000 |
1.38 |
100 / 26 |
Applications requiring
high productivity rates.
Capacitors. Transformers.
Relays. |
|
RE 12800 / RE 1020
|
General purpose resin.
Low viscosity. Good thermal
mechanical shock resistance.
Excellent for demanding
industrial applications. |
D 80 |
1200 |
1.38 |
100 / 28 |
Applications requiring
long manipulation time, for
example manual applications.
Capacitors. Transformers.
Relays. |
|
RE 12840 / RE 1010
|
Two-component liquid
polyurethane resin, solvent
free, rigid, low viscosity &
high thermal conductivity. |
D 86 |
800 |
1.58 |
100 / 30 |
Casting resin for
mechanical and numerous
electrical applications
especially for low or medium
voltage.. |
|
PX 225
|
Low viscosity for easy
casting Good impact and
flexural resistance Very
easy coloring |
Transparent |
2.500 |
80 |
80 |
Thermoplastic-like parts
with a flexural modulus of
elasticity close to 2.500
MPa |
|
|
Klik op het Facebook logo om onze projecten te bekijken